Material Thickness (mm)
0,5-15
TFON Leveltech® TF-M 5520
The TF-M 5520 is a 2000 mm leveling machine for wide sheet and laser-cut parts from 0.5 to 15 mm thick; it corrects distortion by mechanical roller leveling. Wide format in the mid thickness range: the TFON Leveltech® TF-M 5520 levels sheet from 0.5 to 15 mm thick and up to 2000 mm wide. The leveling gap between the rollers is set servo-hydraulically and controlled via PC; the minimum part length is 110 mm. It suits production that levels wide thin-to-medium sheet and laser-cut parts on the same line. Total weight: 22,400 kg.
Minimum Material Length (mm)
110
Quick Changeover for Cylinders
Optional
Leveling Gap Adjustment
Servo Hydraulic / PC Control
Screen
Touch Screen
Maximum Material Width (mm)
2000
Machine Size (WxLxH)
2450x2250x5100
Total Weight (kg)
22400
Request a quote
Close
Request a quote
Fill in the details below and our team will get back to you.
Positioning Via 4 Linear Guides
PC Control
Servo-Hydraulic System
Overload Protection
Leveling Gap Control
Recipe System
IV-POINT
Our machine uses four independent pistons to manage the leveling gap, allowing for precise sheet processing with a tight tolerance of just 0.1mm.
T-VISION
Serving as the brain of the machine, our PC-controlled touch screen provides a complete overview of the entire leveling process. It tracks every critical detail in real-time, giving operators full control and instant visibility into the machine's performance at a single glance.
PRECIPRESS
In large machines, servo-hydraulic systems eliminate wear and backlash issues found in mechanical drives, delivering superior performance. They provide instant response and strong precise control even under high and large loads, ensuring efficiency and durability beyond traditional systems.
T-GUARD
This feature works by constantly monitoring the roller drive motor torque and hydraulic pressure sensors in real time. If the system detects a mismatch usually caused by a thickness input error it instantly intervenes to prevent an overload, ensuring the machine stays in peak condition for years.
GAPSNAP
The machine is equipped with a high-performance servo-hydraulic system that actively manages the leveling gap with extreme precision. It ensures the gap remains perfectly constant as the material passes through the rollers, resisting any deflection to deliver uniform flatness across every part.
PARTTRACK
The integrated recipe system allows operators to save and load specific processing parameters for every part, ensuring consistent quality across different batches. By automating these settings, the system eliminates manual input errors and prevents potential machine damage caused by incorrect operator adjustments.
Leveling Capacity Limits
TFON M Series
Before/After
Before/After
After
Before
After
Before
After
Before
Which job does this machine solve?
- Corrects distortion from cutting and heat input in sheet and cut parts from 0.5 to 15 mm thick by mechanical roller leveling.
- 2000 mm working width: wide sheets and large-format cut parts are leveled on the same machine.
- The leveling gap is set servo-hydraulically and controlled via PC.
- 110 mm minimum part length: short cut parts can be leveled as well.
- Mechanical leveling is kept separate from thermal stress-relief heat treatment; if your drawing specifies a heat treatment, it is planned as a separate process.
Frequently asked questions
Does this machine perform thermal stress relief?
No. It performs mechanical roller leveling. A good flatness result does not certify that the material is stress-free.
What thickness and width does the TFON Leveltech® TF-M 5520 handle?
The TFON Leveltech® TF-M 5520 handles material from 0.5 to 15 mm thick and up to 2000 mm wide. The minimum material length is 110 mm; leveling gap control is servo-hydraulic with PC control.
Can parts with holes and cut-outs be leveled?
Yes, but parts with large cut-outs behave differently from a solid part of the same nominal thickness. A sample test is recommended.
How is the flatness result measured?
The measuring condition (free or supported), the measuring area, the instrument and the drawing limit are recorded together in writing.
How It Compares With Sibling Models
| Model | Working width (mm) | Thickness (mm) | Leveling gap control |
|---|---|---|---|
| TF-M 5560: 600 mm leveling machine | 600 | 0,5-15 | Servo Hydraulic / PC Control |
| TF-M 5511: 1100 mm leveling machine | 1100 | 0,5-15 | Servo Hydraulic / PC Control |
| TF-M 5513: 1300 mm leveling machine | 1300 | 0,5-15 | Servo Hydraulic / PC Control |
| TF-M 5516: 1600 mm leveling machine | 1600 | 0,5-15 | Servo Hydraulic / PC Control |
| TF-M 5520 (this page) | 2000 | 0,5-15 | Servo Hydraulic / PC Control |
| TF-L 9011: 1100 mm sheet metal leveler | 1100 | 1-30 | Servo Hydraulic / PC Control |
| TF-L 9013: 1300 mm sheet metal leveler | 1300 | 1-30 | Servo Hydraulic / PC Control |
