Minimum Material Size (mm)
80 x 80
TFON Lite Surfacer® TF-M1 LITE H2
The TF-M1 LITE H2 is a two-head manual deburring machine for 3 to 200 mm parts up to 800 mm wide; it deburrs and rounds edges on cut prototypes and rework. Constantly changing part variants make it hard to set up a through-feed line for every job. The TFON Lite Surfacer® TF-M1 LITE H2 is a manual deburring and edge rounding machine for this kind of work. It processes parts from 3 to 200 mm thick and up to 800 mm wide, held by a vacuum holding system, with a minimum part size of 80 × 80 mm. It suits prototypes, post-weld rework and pre-assembly corrections; where repeatability is a written acceptance criterion, an automatic configuration is required.
Maximum Material Length (mm)
1500
Material Thickness Range (mm)
3 - 200
Maximum Material Width (mm)
800
Table Width (mm)
800
Table Length (mm)
1300
Machine Power Consumption (kW)
5.5kW
Part Holding System
Vacuum
Number of Heads
2
Request a quote
Close
Request a quote
Fill in the details below and our team will get back to you.
TFON Processing Examples
Review the example alongside the material, tooling and acceptance conditions for your application.
After
Before
After
Before
After
Before
After
Before
Consumables
Lite Surfacer Series Consumables
Heavy Slag Removal Disc
Quick-Change System
700rpm
Ø150
Thanks to its specially designed rubberized pins mounted on the disc, the slag removal disc, easily breaks the slags off the edges of the Oxy-Fuel or Plasma cut parts.
Deburring Disc
Quick-Change System
2200rpm
Ø150
Deburring discs perform the process of removing the burrs on the material surface.
Oxide Removal Disc
Quick-Change System
700rpm
Ø150
With its special tine structure, you will not have to any additional labor process thanks to the cleaning process of
the oxides formed on the material surfaces.
Edge Rounding Disc
Quick-Change System
1600rpm
Ø150
It provides equal edge rounding at every point with its special disc brush system.
Finishing Disc
Quick-Change System
1600rpm
Ø150
Finishing Disc allows the material to gain an aesthetically pleasing appearance in the ending step of the cleaned product.
Which job does this machine solve?
- Deburring and edge rounding for prototypes, mixed batches and rework, without setting up an automatic line.
- 3 to 200 mm thickness range: parts from thin sheet to heavy plate on the same machine.
- Part widths up to 800 mm with vacuum holding; minimum part size 80 × 80 mm.
- By changing discs, the machine handles heavy deburring, deburring, oxide removal, edge rounding and satin finishing.
- Honest positioning: the result depends on the operator. If repeatability is a written acceptance criterion, an automatic TFON Surfacer® configuration is required.
Frequently asked questions
What is the difference between TF-M1 LITE H1 and H2?
The H1 has a single head and the H2 has two heads. Both have the same working range: 3 to 200 mm thickness, up to 800 mm width, up to 1500 mm length and an 800 × 1300 mm vacuum table.
When is a manual machine the better choice?
For prototype work, constantly changing low-volume batches, post-weld rework and corrections before assembly. Not every production needs an automatic through-feed line; for this work the TFON Lite Surfacer® TF-M1 LITE H2 handles parts from 3 to 200 mm thick.
Which consumables are used?
The consumables used on the TFON Lite Surfacer® TF-M1 LITE H2 are: Heavy Slag Removal Disc, Deburring Disc, Oxide Removal Disc, Edge Rounding Disc and Finishing Disc. If stainless steel is processed, consumables separate from those used for carbon steel are required.
Can a manual machine deliver repeatable results?
On a manual machine, the result depends on the operator. If repeatability is a written acceptance criterion, an automatic configuration is required. Lite Surfacer® is designed for work where flexibility, not repeatability, is the priority.
What part dimensions does the TFON Lite Surfacer® TF-M1 LITE H2 handle?
The TFON Lite Surfacer® TF-M1 LITE H2 works on parts from 3 to 200 mm thick, up to 800 mm wide and with a minimum size of 80 × 80 mm. The part is held by a vacuum holding system.
How It Compares With Sibling Models
| Model | Max. part width (mm) | Thickness (mm) | Heads |
|---|---|---|---|
| TF-M1 LITE H2 (this page) | 800 | 3 - 200 | 2 |
| TF-M1 LITE H1: 800 mm manual deburring machine | 800 | 3 - 200 | 1 |
All Manual Deburring & Edge Rounding Machines · Compare all models
